Steam Crave Hadron Pro DNA250C Combo Kit 400W

  • Ex Tax: $239.90
  • Product Code: M00002996
  • Availability: In Stock

Details: Steam Crave Hadron Pro DNA250C Combo Kit is combined with Hadron Pro DNA250C Mod and Ragnar RDTA. Hadron Pro Mod does not provide 18650 or 21700 batteries as a special feature but is equipped with FullyMax's powerful Li-Po(lithium polymer) 4s battery pack, through which an incredible 400W ..

$239.90

Available Options

Details:
Steam Crave Hadron Pro DNA250C Combo Kit is combined with Hadron Pro DNA250C Mod and Ragnar RDTA. Hadron Pro Mod does not provide 18650 or 21700 batteries as a special feature but is equipped with FullyMax's powerful Li-Po(lithium polymer) 4s battery pack, through which an incredible 400W output power can be achieved. The FullyMax 4s 1600mAh 30C battery pack provides an unprecedented experience with good safety performance. It can even handle peak loads of 30C, and the perfect combination of long service life and high energy density makes Hadron Pro Mod an unprecedented performance improvement. Steam Crave Hadron Pro DNA250C Box Mod is powered by a changeable Li-Po 1600mAh battery, it fires to a 400W maximum output with an industry leading power efficiency rating. Steam Crave Hadron Pro Box Mod adopts the advanced Steam Crave DNA250C chipset. It supports Replay/Boost/VW/TC modes. The Mod is charged via USB 3A charging (2A Suggested). The high discharge battery can provide low profile, low chance of leaking electrolyte, low internal resistance, long cycle life and safety guarantee. Its 0.9"" full color TFT screen shows vaping data clearly, brings you more convenience. The Aromamizer Ragnar RDTA can hold 18/25ml e-juice capacity (Replacement Glass is included). It can produce 80% side airflow, 20% bottom airflow and will provide smooth airflow for medium and high power vaping. Steam Crave Aromamizer Ragnar RDTA adopts postless deck with bottom honeycomb air holes for wonderful vaping experience.

Main Features:
1. Changeable Built-in battery, Li-Po 1600mAh 4s
2. DNA250C Chipset: Replay/Boost/VW/TC modes
3. Maximum output 400W
4. 0.9"" full color TFT screen
5. 22mm wide bore 810 drip tip
6. Postless deck with bottom honeycomb air holes
7. 80% side airflow and 20% bottom airflow
8. Smooth airflow for medium and high power vaping
9. Multiple protections: Atomizer/Low Resistance/Short Circuit/Overheat/Low Voltage Step Down/Onboard Reverse Polarity Protection

Technical Data:
Steam Crave Hadron Pro Mod:
Dimensions:59 x 36.66 x 116.1mm
Battery:LiPO battery included (1600mah, 4s)
Input Voltage:6.0V-16.8V
Battery Voltage:12V-16.8V (3.0V-4.2V, 4s)
Output Voltage:0.2V-16.8V
Power Range:1-400W
Current Range:0.5A-30A
Max Charging Current:3A (2A suggested)
Temperature Range:200°F-600°F
Coil Material supported:Nickel, Titanium, SS460, SS316, KA1, Ni80, Ni90
Screen Pixel:0.9"" (80*160 pixel) full Color TFT
Body Material:Zinc Alloy

Steam Crave Aromamizer Ragnar RDTA:
Diameter:35mm
Height with drip tip:58mm, 75mm
Drip tip:810
Capacity:18ml, 25ml
Build deck:Postless deck
Coil building:Single or Dual Coil Configuration
Thread:510


Package Includes:
1x Hadron Pro DNA 250C Box Mod (Evolv logo on) (equipped with 1600mAh, 4s Li-po pack)
1x USB Connecting cable
1x Aromamizer Ragnar RDTA (equipped with Ragnar postless deck)
1x Ragnar series deck
1x Chamber reducer (All Plus V1 / V2 decks can be used with this Chamber reducer)
1x Spare part bag of O rings and grub srews, slotted screws.
1x 18ml glass
1x 25ml conversion chimney
2x 25ml Glass
2x Coil cotton
1x Vape Band
1x Allen Key
2x User Manual

Write a review

Note: HTML is not translated!
    Bad           Good